Eclipse Combustion F8000 Series Service/ Instructions d'exploitation Page 37

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 77
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 36
3-9
OPEN OPTIONAL COVER: If equipped with lift cover, unlatch and open cover.
DEPLOY LIFT: Raise STOW LOCK HANDLE then pull lift OUTWARD to its fully deployed
position.
RAISE HANDRAILS: Raise RIGHT handrail until handrail lock engages then raise LEFT handrail
until handrail lock engages.
RAISE PLATFORM SLIGHTLY: Press and hold /UP switch until platform raises at least
1-inch.
PULL-OUT SLIDING PLATFORM SECTION: Position PLATFORM LOCK HANDLE to RIGHT
and pull sliding platform OUTWARD until it locks.
LOWER PLATFORM: Press and hold /DOWN switch until platform reaches ground level and
rollstop opens completely.
BOARD PLATFORM: Position wheelchair, facing outward if possible, in center of platform and
LOCK WHEELCHAIR BRAKES.
C STANDEES should stand in center of platform, facing direction of travel (toward vehicle), and
firmly grasp handrails.
RAISE PLATFORM: Press and hold /UP switch until platform stops at vehicle floor level.
EXIT PLATFORM: CAREFULLY exit platform.
STOW LIFT: Refer to Section 3 below.
2. TO EXIT VEHICLE
OPEN OPTIONAL COVER: If equipped with lift cover, unlatch and open cover.
DEPLOY LIFT: Raise STOW LOCK HANDLE then pull lift OUTWARD to its fully deployed
position.
RAISE HANDRAILS: Raise RIGHT handrail until handrail lock engages then raise LEFT handrail
until handrail lock engages.
RAISE PLATFORM SLIGHTLY: Press and hold /UP switch until platform raises at least
1-inch.
PULL-OUT SLIDING PLATFORM SECTION: Position PLATFORM LOCK HANDLE to RIGHT
and pull sliding platform OUTWARD until it locks.
RAISE PLATFORM: Press and hold /UP switch until platform stops at the proper vehicle floor
level.
BOARD PLATFORM: Position wheelchair, facing outward if possible, in center of platform and
LOCK WHEELCHAIR BRAKES.
C STANDEES should stand in center of platform, facing direction of travel (away from vehicle),
and firmly grasp handrails.
LOWER PLATFORM: Press and hold /DOWN switch until platform reaches ground level and
the rollstop opens completely.
EXIT PLATFORM: CAREFULLY exit platform.
STOW LIFT: Refer to Section 3 below.
3. TO STOW LIFT
POSITION PLATFORM SLIGHTLY: From vehicle floor level, press and hold /DOWN switch,
Vue de la page 36
1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 76 77

Commentaires sur ces manuels

Pas de commentaire